|
RHINO RM/6 MILLING MACHINE |
||||
|
SPINDLE |
|
|
CONTROLLER |
|
|
Spindle nose taper |
Standard R8 taper |
|
Type |
Personal computer |
|
Spindle motor |
0.5 HP CD PMDC |
|
Memory required |
4 MB |
|
Speed range |
300 to 3500 RPM in two ranges |
|
Computer interface |
RS-232C standard serial interface |
|
Hole through spindle |
1.00 inch, R8 collets |
|
PC card required |
None |
|
DIMENSIONS |
|
|
Prog logic controller |
Standard 4 line handshake |
|
Overall size |
36.0" high x 32.5" x 32.5" base |
|
Other interfaces |
User 1, User 2 are DPDT relays |
|
Table size |
22" x 7" |
|
|
|
|
Maximum X travel |
12.0" |
|
MILL SOFTWARE |
|
|
Maximum Y travel |
6.5" |
|
Operating system |
Rhino Robotics proprietary |
|
Maximum Z travel |
8.5" |
|
Application |
RS-274D standard |
|
Maximum feed rate |
30.0 ipm programmable |
|
Standard followed |
Fanuc 6M standard |
|
Maximum rapid travel rate |
70.0 ipm for X and Y; 100 ipm for Z axis |
|
|
|
|
Stand-Alone Operation |
Once the mill is programmed from the Host PC, the computer can be disconnected and the operation can be controlled entirely from the RM/6 control panel and built-in computer. |
|||
|
X direction resolution |
0.0005 per step |
|
||
|
Y direction resolution |
0.0005 per step |
|
||
|
Z direction resolution |
0.0001 |
|
||
|
Spindle to table distance |
12.75" nominal |
|
||
|
Power |
10 amps at 120 VAC |
|
||
|
Weight |
500 lbs. (Shipping weight: 800#) |
|
WARRANTY |
One year |
|
Additional Information - |
|
|
5928 State Route 128
|
