RHINO ROBOTICS LTD.
RM/5 CNC LATHE
HARDWARE SPECIFICATIONS
|
Mechanical |
|
|
Mill type |
Vertical Milling Machine |
|
Ways construction |
Aluminum and steel ways with adjustable gibs |
|
Z axis thrust bearing |
Ball bearing |
|
X & Y thrust bearings |
Steel |
|
All other bearings |
Bronze sintered bearings |
|
Lead screws |
Turned stainless |
|
Lead screw nuts |
Brass alloy, precision cut |
|
|
|
|
Spindle |
|
|
Spindle nose |
3/4-16 tpi |
|
Spindle nose taper |
#1 Morse taper |
|
Tool holder provided |
Nut for taper |
|
Spindle motor |
0.5 Hp universal |
|
Power requirements |
10 amps at 120 VAC, 60 Hertz, single phase |
|
Speed range |
200 to 2000 rpm, manual control (SCR) |
|
Hole through spindle |
0.405 inches |
|
|
|
|
Bed and Travel |
|
|
Overall size |
14.5" x 12.0" x 17.0" high |
|
Maximum X travel |
7.0" |
|
Maximum Y travel |
3.0" |
|
Maximum Z travel |
6.0" |
|
Maximum feed rate |
8.0 inches per minute (programmable) |
|
Maximum rapid travel rate |
12.0 inches per minute (programmable) |
|
X direction resolution |
0.0003" per step of motor |
|
Y direction resolution |
0.0003" per step of motor |
|
Z direction resolution |
0.0003" per step of motor |
|
Table to tool distance |
6.0" |
|
|
|
|
Dimensions |
|
|
Cabinet overall |
36.0" wide x 20.0" deep x 24.0" high |
|
Shipping weight |
200# |
|
|
|
|
Electronics |
|
|
Controller type |
DOS computer |
|
Memory requirements |
2 meg recommended |
|
Computer interface |
RS-232C serial |
|
PC card in computer |
None |
|
Home position detection |
X, Y and Z axes |
|
Interfaces |
|
|
Operational |
RS-232C |
|
Robotic |
Standard 4 line handshake |
|
Programmable Logic Controller |
Standard 4 line handshake |
|
Others |
User #1, User #2 are dry DPDT relays |
|
|
|
|
Lathe Software |
|
|
Operating system |
Rhino proprietary |
|
Application |
RS-274D standard |
|
Standard followed |
Fanuc 6M standard |
|
Commands followed |
|
|
|
|
|
Operating Software |
|
|
The software is designed to be used on a DOS compatible computer. The software is designed to introduce the student to the intricacies of the operation of Computer Numerically Controlled (CNC) machines. It has an extensive help system built into the software. This help system can be summoned at any time with the F1 function key.
The language that is implemented is a large subset of the RS-274D standard put forth by the Electronic Industries Association (EIA). The Fanuc 6M dialect is followed faithfully.
Software allows program to be downloaded to the mill and allows for fully automatic stand-alone operation without the computer being connected to the mill. |
|
|
|
5928 State Route 128
|
