RHINO
ROBOTICS LTD.
FAQ
Frequently Asked Questions
|
Below are links to pages providing
information on frequently asked questions. |
|
|
The pinouts of the motor connector for the Mark III Controller. |
|
|
|
|
|
|
|
The 25 pin to 25 pin pinouts for the cable connecting the Mark III Controller and the computer. |
|
|
|
|
|
|
|
The 25 pin to 9 pin pinouts for the cable connecting the Mark III Controller and the computer. |
|
|
|
|
|
|
|
||
|
|
The pinouts of the motor connector for the Mark IV Controller. |
|
|
|
|
|
|
|
||
|
|
Cable Pinout (25 to 9) for ST/5 and ST/6 Version 1 |
|
|
|
|
|
|
|
Cable Pinout (25 to 9) for Mark IV Controller Version 2, ST/5, ST/6, RM/5 and RM/6 |
|
|
|
|
|
|
|
||
|
|
Troubleshooting steps when these messages are received when running RoboTalk For Windows. |
|
|
|
Possible causes for the RoboTalk error message "Communications To Controller Lost" |
|
|
|
||
|
|
Places to look for information to help identify the version of an ST/5 or ST/6 Lathe. |
|
|
|
|
|
|
|
Locating the serial number on the ST/8 Lathe. |
|
|
|
||
|
|
Plugging the ribbon cable into the motor properly to prevent damage. |
|
|
|
|
|
|
|
Simple definitions and differences between Stepper and Servo Motors. |
|
|
|
|
|
|
|
An explanation of the Robot XR-3 and XR-4 Motor Encoder Optics and Motor Gear Ratios. |
|
|
|
Parts Breakdown for XR and SCARA Motor Encoders |
|
|
|
Which Controller is required for the various
XR Robotic Arms |
|
| XR-2
Robotic Arm |
Information on the obsolete XR-2
Robotic Arm |
|
|
|
5928
State Route 128 |
